Home
(0)
My Cart
+33 (0)9 72 55 88 98
/
contact@classic-red.com
My Account
Contact
(0)
My Cart
English
Français
My Cart
Description
Part number
Qty
Continue shopping
Checkout
Home
Motorcycles
HONDA XL400R, XL500R
Top end spares Honda XL400R and XL500R
Valve, intake Honda XL500S, XL500R, XR500R 1981 and 82
Valve, intake Honda XL500S, XL500R, XR500R 1981 and 82
14711-429-000
The valve troubles are first an unstable idle. A perfect seal of the valves greatly improves the start.
Signs of wear on a valve are a sealing area more than 1.5mm and/or a non-smooth surface. It must not have bites or be rounded.
Their sealing is tested by putting gas in the port. Valve assembled with its springs the maximum are small seeps.
A valve can be grinded in an engine workshop. They are everywhere. Price between 10 and 20 euro per valve.
The seats can also be grinded if necessary. This is not obligatory but if you have your valves like new the seats must be perfect.
20,83 €
25
excl VAT
The valve troubles are first an unstable idle. A perfect seal of the valves greatly improves the start.
Signs of wear on a valve are a sealing area more than 1.5mm and/or a non-smooth surface. It must not have bites or be rounded.
Their sealing is tested by putting gas in the port. Valve assembled with its springs the maximum are small seeps.
A valve can be grinded in an engine workshop. They are everywhere. Price between 10 and 20 euro per valve.
The seats can also be grinded if necessary. This is not obligatory but if you have your valves like new the seats must be perfect.
Items in the same category
More infos...
Carburator, drain screw Honda CB, CRF, NX, XL, XLR and XR
4,92 €
-56%
More infos...
Gasket, cylinder base Honda XL250S, XL250R, XL500S, XL500R
7,50 €
3,33 €
-57%
More infos...
Valve oil seal Honda XR500R 81 to 82, XR600R, XL250R 82 et 83, XL400R, XL500R, XL600R, XR500R RFVC, XR600R, XL600LM, NX650
11,67 €
5,00 €
More infos...
Camshaft, (18) rocker shaft pin Honda XL250S, XL250R 82 and 83, XR250R 79 to 83, XL500S, XL500R, XR500R 79 to 82
5,75 €
-79%
More infos...
Carburetor bowl Honda XL125R, XL125S, XL185S, XL200R, XR200R, XL250R 1982 and 83, XR250L, XL500S, XL500R, XR400R
46,67 €
10,00 €
-44%
More infos...
Gasket, cylinder base Honda XL500S, XL500R, XR500R 1981 and 82
7,50 €
4,17 €
More infos...
Valve, exhaust Honda XL500S, XL500R, XR500R 1981 and 82
20,83 €
-34%
More infos...
Cylinder head, valve setting cap Honda XL250S, XL250R, XR250R, XL500S, XL500R, XR500R
24,17 €
15,83 €
More infos...
Piston, rings set +0,25mm NOS Honda XL400S, XL400R, XL500S, XL500R, XR500R 81 and 82, FT500 13021-429-005
49,17 €
More infos...
Carburetor, airbox connecting collar Honda XL400S, XL400R, XL500S, XR500 79 à 82 -Tightening 59 to 65mm-
7,25 €
We use cookies on our site to collect statistics on visits. By clicking on I accept or by continuing on this site you accept the use of these cookies.
I accept
Confirm?