Home
(0)
My Cart
+33 (0)9 72 55 88 98
/
contact@classic-red.com
My Account
Contact
(0)
My Cart
English
Français
EUR
EUR
€
GBP
£
USD
$
My Cart
Description
Part number
Qty
Continue shopping
Checkout
Home
Motorcycles
HONDA XR500 1983 and 1984
Top end spares Honda XR500R 1983 and 1984
Valve, exhaust for Honda XR500R 1983-84, XR600R, XL600R, XL600LM, XL600RM, NX650 88 to 94, XR650L
Valve, exhaust for Honda XR500R 1983-84, XR600R, XL600R, XL600LM, XL600RM, NX650 88 to 94, XR650L
14721-MG2-790
Same as the Honda genuine reference
14721-MG2-790
14721-MG3-000
Fit also for FMX650
, SLR650
The valve troubles are first an unstable idle. A perfect seal of the valves greatly improves the start.
Signs of wear on a valve are a sealing area more than 1.5mm and/or a non-smooth surface. It must not have bites or be rounded.
Their sealing is tested by putting gas in the port. Valve assembled with its springs the maximum are small seeps.
A valve can be grinded in an engine workshop. They are everywhere. Price between 10 and 20 euro per valve.
The seats can also be grinded if necessary. This is not obligatory but if you have your valves like new the seats must be perfect.
27,50 €
33
excl VAT
Same as the Honda genuine reference
14721-MG2-790
14721-MG3-000
Fit also for FMX650
, SLR650
The valve troubles are first an unstable idle. A perfect seal of the valves greatly improves the start.
Signs of wear on a valve are a sealing area more than 1.5mm and/or a non-smooth surface. It must not have bites or be rounded.
Their sealing is tested by putting gas in the port. Valve assembled with its springs the maximum are small seeps.
A valve can be grinded in an engine workshop. They are everywhere. Price between 10 and 20 euro per valve.
The seats can also be grinded if necessary. This is not obligatory but if you have your valves like new the seats must be perfect.
Items in the same category
-5%
More infos...
Piston, Wiseco 92.50 Honda XR500R 1983 et 84 -4330M09250-
174,17 €
165,83 €
More infos...
Distribution? top end gaskets set Honda XR500R RFVC
60,42 €
More infos...
Piston, rings set 93,00mm for Wiseco piston Honda XR500R 1983 and 84
35,83 €
-21%
More infos...
Gasket set bottom and top end Athena for Honda XR500R RFVC 1983 and 84
104,17 €
82,50 €
More infos...
(5) Cylinder bolt 10x110 Honda XR500R RFVC, XR600R, XL600R, XL600LM, XL600RM, NX650 88 and 89, XR650L, GB500
12,50 €
More infos...
Piston, rings set +0.25 genuine Honda XR500R 1983 and 84 13021-MK4-602
49,58 €
More infos...
Gaskets, special sealant for engine covers for Honda
12,42 €
More infos...
Camshaft chain tensioner O-ring axle (14) Honda XR350R, XL350R, XR500R, XR600R, XL600R, XL600LM, NX650
2,92 €
More infos...
Intake, O ring intake pipe gasket for Honda Honda XR500R, XR600R and XL600R
3,33 €
-67%
More infos...
Valve, (5) rocker arm Honda XR350R, XL350R, XR500R 83 et 84, XR600R 85-86-87, XL600R, XL600LM, NX650
7,50 €
2,50 €
We use cookies on our site to collect statistics on visits. By clicking on I accept or by continuing on this site you accept the use of these cookies.
I accept
Confirm?