Home
(0)
My Cart
+33 (0)9 72 55 88 98
/
contact@classic-red.com
My Account
Contact
(0)
My Cart
English
Français
EUR
EUR
€
GBP
£
USD
$
My Cart
Description
Part number
Qty
Continue shopping
Checkout
Home
Motorcycles
HONDA XR500 1983 and 1984
Top end spares Honda XR500R 1983 and 1984
Valve, intake for Honda XR500R 1983-84, XR600R, XL600R, XL600LM, XL600RM, NX650, XR650L, XR650R
Valve, intake for Honda XR500R 1983-84, XR600R, XL600R, XL600LM, XL600RM, NX650, XR650L, XR650R
14711-MG2-790
Same as the Honda genuine reference
14711-MG2-790
14711-MG3-000
Fit also for FX650, FMX650
, SLR650
, VIGOR 650
The valve troubles are first an unstable idle. A perfect seal of the valves greatly improves the start.
Signs of wear on a valve are a sealing area more than 1.5mm and/or a non-smooth surface. It must not have bites or be rounded.
Their sealing is tested by putting gas in the port. Valve assembled with its springs the maximum are small seeps.
A valve can be grinded in an engine workshop. They are everywhere. Price between 10 and 20 euro per valve.
The seats can also be grinded if necessary. This is not obligatory but if you have your valves like new the seats must be perfect.
16,67 €
20
excl VAT
Same as the Honda genuine reference
14711-MG2-790
14711-MG3-000
Fit also for FX650, FMX650
, SLR650
, VIGOR 650
The valve troubles are first an unstable idle. A perfect seal of the valves greatly improves the start.
Signs of wear on a valve are a sealing area more than 1.5mm and/or a non-smooth surface. It must not have bites or be rounded.
Their sealing is tested by putting gas in the port. Valve assembled with its springs the maximum are small seeps.
A valve can be grinded in an engine workshop. They are everywhere. Price between 10 and 20 euro per valve.
The seats can also be grinded if necessary. This is not obligatory but if you have your valves like new the seats must be perfect.
Items in the same category
More infos...
Gaskets, special sealant for engine covers for Honda
12,42 €
More infos...
Piston, rings set +0.25 genuine Honda XR500R 1983 and 84 13021-MK4-602
49,58 €
More infos...
(9) Cylinder head bolt 8x70 Honda XR500R RFVC, XR600R 85 to 87, XL600R, XL600LM, XL600RM, GB500
7,92 €
-67%
More infos...
Valve, (5) rocker arm Honda XR350R, XL350R, XR500R 83 et 84, XR600R 85-86-87, XL600R, XL600LM, NX650
7,50 €
2,50 €
More infos...
Valve, cylinder head cover gasket HONDA XR500R RFVC, XL600R 1983 12391-MG3-004
30,00 €
-41%
More infos...
Valve, front left rocker Honda XR500R RFVC, XR600R, XL600R, XL600LM, XR650L, NX650
54,92 €
32,50 €
More infos...
Carburator tank valve Honda CRF, XR, XLS and XLR
4,92 €
More infos...
Carburator air cut Honda XR and XLR double carburetor
10,42 €
More infos...
Camshaft chain tensioner O-ring axle (14) Honda XR350R, XL350R, XR500R, XR600R, XL600R, XL600LM, NX650
2,92 €
More infos...
Camshaft, (11) decompresser shaft pin HONDA HONDA X500R RFVC, XR600R, XL600R, XL600LM, XL600RM
8,33 €
Available soon
We use cookies on our site to collect statistics on visits. By clicking on I accept or by continuing on this site you accept the use of these cookies.
I accept
Confirm?