Home
(0)
My Cart
+33 (0)9 72 55 88 98
/
contact@classic-red.com
My Account
Contact
(0)
My Cart
English
Français
EUR
EUR
€
GBP
£
USD
$
My Cart
Description
Part number
Qty
Continue shopping
Checkout
Home
Motorcycles
HONDA XR200 1981 to 1983
Top end spares Honda XR200R
Camshaft, intake valve XL125S, XL125R, XL185, XR185, XL200R 1981 to 1983, XR200R 81 to 83, TL200R
Camshaft, intake valve XL125S, XL125R, XL185, XR185, XL200R 1981 to 1983, XR200R 81 to 83, TL200R
14711-437-000
Fit also for :
Honda XL125S all years
Honda XL125R
Honda XL185S all years
Honda XR185 all years
Honda XL200R, all years
Honda XR200, all years
Honda XR200R, year 1981 to 83
Honda XR200R, year 1986 to 2002
Honda ATC185, all years
Honda ATC200, all years
Honda ATC200E and ES, Big Red
Honda ATC200M and S BIG RED
Honda ATC200X all years
Honda TRX200, Fourtrax
Honda CB125S, all years
The valve troubles are first an unstable idle. A perfect seal of the valves greatly improves the start.
Signs of wear on a valve are a sealing area more than 1.5mm and/or a non-smooth surface. It must not have bites or be rounded.
Their sealing is tested by putting gas in the port. Valve assembled with its springs the maximum are small seeps.
A valve can be grinded in an engine workshop. They are everywhere. Price between 10 and 20 euro per valve.
The seats can also be grinded if necessary. This is not obligatory but if you have your valves like new the seats must be perfect.
14,58 €
17.5
excl VAT
Fit also for :
Honda XL125S all years
Honda XL125R
Honda XL185S all years
Honda XR185 all years
Honda XL200R, all years
Honda XR200, all years
Honda XR200R, year 1981 to 83
Honda XR200R, year 1986 to 2002
Honda ATC185, all years
Honda ATC200, all years
Honda ATC200E and ES, Big Red
Honda ATC200M and S BIG RED
Honda ATC200X all years
Honda TRX200, Fourtrax
Honda CB125S, all years
The valve troubles are first an unstable idle. A perfect seal of the valves greatly improves the start.
Signs of wear on a valve are a sealing area more than 1.5mm and/or a non-smooth surface. It must not have bites or be rounded.
Their sealing is tested by putting gas in the port. Valve assembled with its springs the maximum are small seeps.
A valve can be grinded in an engine workshop. They are everywhere. Price between 10 and 20 euro per valve.
The seats can also be grinded if necessary. This is not obligatory but if you have your valves like new the seats must be perfect.
Items in the same category
-43%
More infos...
Carburator, cable connecting cover for Honda XL, XLR, CR, CRF, NX, TL
12,50 €
7,08 €
More infos...
Carburettor repair set Honda XR200R, CRF230F, XR250R from 1996 to 2004
27,08 €
More infos...
Valve oil seal Honda XL125S, XL125R, XR200, XL250S, XR250 81 à 85, XL250R from 84, XR350R, XL350R, XR400R
4,92 €
More infos...
Carburetor repair set Honda XL125R, XL125S, XL185S, XL200R, XR200R
16,58 €
More infos...
Distribution, camshaft with 2 rockers for Honda XL200R, XR200R
82,50 €
More infos...
Piston set 67.00mm WISECO Honda XL200R, XR200R 81 to 83
132,50 €
Available on request
More infos...
Gasket CDI cover Honda XL200R, XR200R
5,00 €
More infos...
Ignition, spark plug wrench Honda XL, XLS, XLR, XR and NX
7,67 €
More infos...
Ignition, spark plug cap Honda XLR and XR non RFVC
26,67 €
More infos...
Valve cap Honda XL125S, XL125R, XR200, CRF230, XL250R RFVC, XR250R RFVC, XR400R
6,25 €
We use cookies on our site to collect statistics on visits. By clicking on I accept or by continuing on this site you accept the use of these cookies.
I accept
Confirm?