Home
(0)
My Cart
+33 (0)9 72 55 88 98
/
contact@classic-red.com
My Account
Contact
(0)
My Cart
English
Français
EUR
EUR
€
GBP
£
USD
$
My Cart
Description
Part number
Qty
Continue shopping
Checkout
Home
Motorcycles
HONDA XR500 1983 and 1984
Top end spares Honda XR500R 1983 and 1984
Valve, exhaust for Honda XR500R 1983-84, XR600R, XL600R, XL600LM, XL600RM, NX650 88 to 94, XR650L
Valve, exhaust for Honda XR500R 1983-84, XR600R, XL600R, XL600LM, XL600RM, NX650 88 to 94, XR650L
14721-MG2-790
Same as the Honda genuine reference
14721-MG2-790
14721-MG3-000
Fit also for FMX650
, SLR650
The valve troubles are first an unstable idle. A perfect seal of the valves greatly improves the start.
Signs of wear on a valve are a sealing area more than 1.5mm and/or a non-smooth surface. It must not have bites or be rounded.
Their sealing is tested by putting gas in the port. Valve assembled with its springs the maximum are small seeps.
A valve can be grinded in an engine workshop. They are everywhere. Price between 10 and 20 euro per valve.
The seats can also be grinded if necessary. This is not obligatory but if you have your valves like new the seats must be perfect.
27,50 €
33
excl VAT
Same as the Honda genuine reference
14721-MG2-790
14721-MG3-000
Fit also for FMX650
, SLR650
The valve troubles are first an unstable idle. A perfect seal of the valves greatly improves the start.
Signs of wear on a valve are a sealing area more than 1.5mm and/or a non-smooth surface. It must not have bites or be rounded.
Their sealing is tested by putting gas in the port. Valve assembled with its springs the maximum are small seeps.
A valve can be grinded in an engine workshop. They are everywhere. Price between 10 and 20 euro per valve.
The seats can also be grinded if necessary. This is not obligatory but if you have your valves like new the seats must be perfect.
Items in the same category
More infos...
Cam chain tensioner pin Honda XR600R starting from 88, XL600R starting from 86, XL600LM, NX650 14516-MN1-670
16,58 €
More infos...
Piston, rings set 92mm for Wiseco piston Honda XR500R 1983 and 84
35,83 €
-8%
More infos...
Ignition, spark plug cap Honda XLR, XLM, NX and XR RFVC engine
25,42 €
23,33 €
More infos...
Distribution, camshaft Honda XR500R 1983 and 84, XR600R 1985 to 87, XL600R, XL600LM, XL600LM
307,50 €
More infos...
Gaskets, special sealant for engine covers for Honda
12,42 €
More infos...
Valve, (12) Oil seal décompresseur Honda XR250R, XL250R, XR350R 85 and 86, XL350R, XR500R 83 and 84, XL600R, XR600R, XL600LM
3,46 €
More infos...
Piston pin Honda XR500R 1983 et 84
24,17 €
-21%
More infos...
Gasket set bottom and top end Athena for Honda XR500R RFVC 1983 and 84
104,17 €
82,50 €
More infos...
Piston set 92,00 Honda XR500R 1983 et 84
249,17 €
-57%
More infos...
Valve oil seal Honda XR500R 81 to 82, XR600R, XL250R 82 et 83, XL400R, XL500R, XL600R, XR500R RFVC, XR600R, XL600LM, NX650
11,67 €
5,00 €
We use cookies on our site to collect statistics on visits. By clicking on I accept or by continuing on this site you accept the use of these cookies.
I accept
Confirm?