Home
(0)
My Cart
+33 (0)9 72 55 88 98
/
contact@classic-red.com
My Account
Contact
(0)
My Cart
English
Français
EUR
EUR
€
GBP
£
USD
$
My Cart
Description
Part number
Qty
Continue shopping
Checkout
Home
Motorcycles
HONDA XR500 1983 and 1984
Top end spares Honda XR500R 1983 and 1984
Valve, intake for Honda XR500R 1983-84, XR600R, XL600R, XL600LM, XL600RM, NX650, XR650L, XR650R
Valve, intake for Honda XR500R 1983-84, XR600R, XL600R, XL600LM, XL600RM, NX650, XR650L, XR650R
14711-MG2-790
Same as the Honda genuine reference
14711-MG2-790
14711-MG3-000
Fit also for FX650, FMX650
, SLR650
, VIGOR 650
The valve troubles are first an unstable idle. A perfect seal of the valves greatly improves the start.
Signs of wear on a valve are a sealing area more than 1.5mm and/or a non-smooth surface. It must not have bites or be rounded.
Their sealing is tested by putting gas in the port. Valve assembled with its springs the maximum are small seeps.
A valve can be grinded in an engine workshop. They are everywhere. Price between 10 and 20 euro per valve.
The seats can also be grinded if necessary. This is not obligatory but if you have your valves like new the seats must be perfect.
16,67 €
20
excl VAT
Same as the Honda genuine reference
14711-MG2-790
14711-MG3-000
Fit also for FX650, FMX650
, SLR650
, VIGOR 650
The valve troubles are first an unstable idle. A perfect seal of the valves greatly improves the start.
Signs of wear on a valve are a sealing area more than 1.5mm and/or a non-smooth surface. It must not have bites or be rounded.
Their sealing is tested by putting gas in the port. Valve assembled with its springs the maximum are small seeps.
A valve can be grinded in an engine workshop. They are everywhere. Price between 10 and 20 euro per valve.
The seats can also be grinded if necessary. This is not obligatory but if you have your valves like new the seats must be perfect.
Items in the same category
-22%
More infos...
Valve cap Honda XR350R, XL350R, XR500R, XR600R, XL600R, XL600LM, NX650, XR650L
20,83 €
16,25 €
-21%
More infos...
Gasket set bottom and top end Athena for Honda XR500R RFVC 1983 and 84
104,17 €
82,50 €
More infos...
Carburator air cut Honda XR and XLR double carburetor
10,42 €
-57%
More infos...
Valve oil seal Honda XR500R 81 to 82, XR600R, XL250R 82 et 83, XL400R, XL500R, XL600R, XR500R RFVC, XR600R, XL600LM, NX650
11,67 €
5,00 €
More infos...
(9) Cylinder head bolt 8x70 Honda XR500R RFVC, XR600R 85 to 87, XL600R, XL600LM, XL600RM, GB500
7,92 €
More infos...
Cam chain, M6x20 tensioner axle screw Honda GB500, XL600R 1987, XL600LM, XL600RM, XR600R, NX500, NX650
3,25 €
-67%
More infos...
Valve, (6) rocker arm Honda XR350R, XL350R, XR500R 83 et 84, XR600R 85-86-87, XL600R 14446-KF0-000
7,50 €
2,50 €
More infos...
Wheel, front lright side oil seal for Honda XR and XLR
5,67 €
More infos...
Gaskets, special sealant for engine covers for Honda
12,42 €
More infos...
Distribution, camshaft Honda XR500R 1983 and 84, XR600R 1985 to 87, XL600R, XL600LM, XL600LM
307,50 €
We use cookies on our site to collect statistics on visits. By clicking on I accept or by continuing on this site you accept the use of these cookies.
I accept
Confirm?