Home
(0)
My Cart
+33 (0)9 72 55 88 98
/
contact@classic-red.com
My Account
Contact
(0)
My Cart
English
Français
EUR
EUR
€
GBP
£
USD
$
My Cart
Description
Part number
Qty
Continue shopping
Checkout
Home
Motorcycles
HONDA XR500 1983 and 1984
Top end spares Honda XR500R 1983 and 1984
Valve, intake for Honda XR500R 1983-84, XR600R, XL600R, XL600LM, XL600RM, NX650, XR650L, XR650R
Valve, intake for Honda XR500R 1983-84, XR600R, XL600R, XL600LM, XL600RM, NX650, XR650L, XR650R
14711-MG2-790
Same as the Honda genuine reference
14711-MG2-790
14711-MG3-000
Fit also for FX650, FMX650
, SLR650
, VIGOR 650
The valve troubles are first an unstable idle. A perfect seal of the valves greatly improves the start.
Signs of wear on a valve are a sealing area more than 1.5mm and/or a non-smooth surface. It must not have bites or be rounded.
Their sealing is tested by putting gas in the port. Valve assembled with its springs the maximum are small seeps.
A valve can be grinded in an engine workshop. They are everywhere. Price between 10 and 20 euro per valve.
The seats can also be grinded if necessary. This is not obligatory but if you have your valves like new the seats must be perfect.
16,67 €
20
excl VAT
Same as the Honda genuine reference
14711-MG2-790
14711-MG3-000
Fit also for FX650, FMX650
, SLR650
, VIGOR 650
The valve troubles are first an unstable idle. A perfect seal of the valves greatly improves the start.
Signs of wear on a valve are a sealing area more than 1.5mm and/or a non-smooth surface. It must not have bites or be rounded.
Their sealing is tested by putting gas in the port. Valve assembled with its springs the maximum are small seeps.
A valve can be grinded in an engine workshop. They are everywhere. Price between 10 and 20 euro per valve.
The seats can also be grinded if necessary. This is not obligatory but if you have your valves like new the seats must be perfect.
Items in the same category
More infos...
Cam chain, M6x20 tensioner axle screw Honda GB500, XL600R 1987, XL600LM, XL600RM, XR600R, NX500, NX650
3,25 €
More infos...
Camshaft, (11) decompresser shaft pin HONDA HONDA X500R RFVC, XR600R, XL600R, XL600LM, XL600RM
8,33 €
Available soon
More infos...
(4) Cylinder bolt 10x66 Honda XR500R RFVC, XR600R, XL600R, XL600LM, XL600RM, NX650 88 and 89, XR650L, GB500
8,33 €
More infos...
Distribution? top end gaskets set Honda XR500R RFVC
60,42 €
More infos...
Carburetor, intake pipe connecting collar Honda XL250S, XR250R and XL250R all years, XL350R, XR350R 83 and 84, XR500R 83 and 84, XL600R, XR600R 85 to
11,63 €
More infos...
camshaft, (26) C3 bearing right side Honda XR and XLR 91002-MK5-008
12,50 €
More infos...
Camshaft, (27) left C3 bearing Honda XR, XLR, NX650 91003-KF0-008
10,00 €
More infos...
Cams chain tensioner spring Honda XR500R, XR600R, XL600R, XL600LM, NX650 14514-MG3-000
5,75 €
More infos...
Valve, exhaust for Honda XR500R 1983-84, XR600R, XL600R, XL600LM, XL600RM, NX650 88 to 94, XR650L
27,50 €
More infos...
Piston set 92,25 Honda XR500R 1983 et 84
249,17 €
We use cookies on our site to collect statistics on visits. By clicking on I accept or by continuing on this site you accept the use of these cookies.
I accept
Confirm?