Home
0
Log in
Contact
0
My cart
EUR
EUR
(€)
GBP
(£)
USD
($)
0
Log in
My Account
My profile
My orders
My saved carts
Log out
My cart
Contact
Country
EUR (€)
Home
€
EUR
(€)
GBP
(£)
USD
($)
Continue shopping
Checkout
Choose your country
We work in partnership with many official Classic Red dealers around the world.
You can select the country of your choice from the list below, whatever your choice, we can deliver worldwide!
France
United Kingdom
Home
Choose your country
We work in partnership with many official Classic Red dealers around the world.
You can select the country of your choice from the list below, whatever your choice, we can deliver worldwide!
France
United Kingdom
Home
Motorcycles
HONDA XR250R from 1986 with single carburetor
Engine spares Honda XR250R starting from 1986
Valve, exhaust Honda XL250R starting from 1984, XR250R 1984 and 85 14721-KK1-000
Valve, exhaust Honda XL250R starting from 1984, XR250R 1984 and 85 14721-KK1-000
14721-KK1-000
14721-KK1-000, XR250R 1984 to 1990
(engine ME06-500001 to 5699999)
The valve troubles are first an unstable idle. A perfect seal of the valves greatly improves the start.
Signs of wear on a valve are a sealing area more than 1.5mm and/or a non-smooth surface. It must not have bites or be rounded.
Their sealing is tested by putting gas in the port. Valve assembled with its springs the maximum are small seeps.
A valve can be grinded in an engine workshop. They are everywhere. Price between 10 and 20 euro per valve.
The seats can also be grinded if necessary. This is not obligatory but if you have your valves like new the seats must be perfect.
18,33 €
22
excl VAT
14721-KK1-000, XR250R 1984 to 1990
(engine ME06-500001 to 5699999)
The valve troubles are first an unstable idle. A perfect seal of the valves greatly improves the start.
Signs of wear on a valve are a sealing area more than 1.5mm and/or a non-smooth surface. It must not have bites or be rounded.
Their sealing is tested by putting gas in the port. Valve assembled with its springs the maximum are small seeps.
A valve can be grinded in an engine workshop. They are everywhere. Price between 10 and 20 euro per valve.
The seats can also be grinded if necessary. This is not obligatory but if you have your valves like new the seats must be perfect.
Items in the same category
More infos...
Piston, rings set 75mm bore, genuine Honda XR250R et XL250R RFVC engine
47,29 €
-6%
More infos...
Valves spring set Honda XR200R, XL250R, XR250R, XR250L with RFVC engine
159,17 €
149,17 €
More infos...
Intake pipe XR250R starting from 1986 16211-KT1-013
32,50 €
More infos...
Oil filter Honda XR, XLR and NX
3,92 €
More infos...
Clutch, 6 plate disks Honda CRF250R 2004 to 17, XR250R from 1984, XL250R from 84, XL350R, XR350R, XR400R
40,83 €
-60%
More infos...
Coil, New Old Spare stator Honda XR250R starting from 1992, 93 and 94
265,83 €
107,50 €
More infos...
Oil filter O-ring cover Honda XL250R, XL350R, XR400R, XL600R, XR250R, XR350R, XR500R, XR600R, XL600LM, NX650
2,50 €
-43%
More infos...
Distribution, camshaft chain 102 links Honda XR250R starting from 1996
57,50 €
32,50 €
-26%
More infos...
Bottom end, Prox connecting rod kit Honda XR250R starting from 1986
157,50 €
115,83 €
More infos...
Bottom end, bearing right side countershat 17x42x12 Honda XR200R RFVC, XL250R RFVC, XR250R RFVC, MT250, CR250R 78 to 83, XL350R 84 et 85, XR350R 83 et
18,33 €
We use cookies on our site to collect statistics on visits. By clicking on I accept or by continuing on this site you accept the use of these cookies.
I accept
Confirm?